Solar Water Heater DGL
Technical Specifications
| Inner tank: | Stainless steel SUS304-2B, Thickness >0.41mm |
| Compatible | Upto 140 PPM hardness |
| Outer tank: | Stainless steel SUS430, Thickness >0.4mm |
| Frame: | Aluminum/Stainless steel/GI |
| Frame angle: | 27 degree |
| The material of insulation: | 50mm High Density Polyurethane |
| Vacuum tube: | Three layer Cu coated |
| Tube size: | 58*1800mm |
| Tank diameter: | 460 mm |
| Heat preservation: | 48-72 hours |
| Assistant tank for automatic water loading: | Yes |
| Cleaning provision: | optional |
| Mg anode: | optional |
Features
This type uses the all-glass evacuated solar collector tubes as the heat-absorbing element. The high vacuum degree of the clearance between the outer and inner tube reduces the heat emission which is caused by convection and conduction. The layer films (coating) of the all-glass evacuated tubes transfer the sun energy into heat energy. The high absorption and low emittance rate of HEL layer film is unique.
Using thermosiphon system-Depending on the different density between hot water and cold water, a water flowing cycle is created in the tubes. Hot water flows automatically upwards while the cold water flows down. The water in the storage tank will be heated from the natural circulation.
Parameter Table
| Model | Solar flat plate | Capacity of water tank (Lit) |
Area (sq. m) |
Bath (People/day) |
|
|---|---|---|---|---|---|
| Qty | Size (mm) | ||||
| DGL-R | 10 | 58*1800 | 100 | 0.94 | 2-3 |
| DGL-S | 15 | 58*1800 | 150 | 1.13 | 3-4 |
| DGL-T | 20 | 58*1800 | 200 | 1.89 | 4-5 |
| DGL-U | 30 | 58*1800 | 300 | 2.83 | 5-6 |
| DGL-V | 50 | 58*1800 | 500 | 3.95 | 7-8 |
